Epson Dot matrix Printer Setup and Page Setup.
1. Switch off the printer.
2. Press and Hold "Tear Off" or "Font" Button and Switch On the printer.
3. Switch Off the printer.
4. Press and hold 3 buttons together (" LF/FF, "Load/Eject", "Pause") and switch on the printer.
5. Install the printer driver complete, if already installed, ignore this step.
6. Adjust the paper for the start position of the print.
a. switch off the printer and on.
b. press the "Load Eject" button once to bring the paper on the default position.
c. Make sure that any of the lights not flashing.
d. press and hold "Pause" button for 3 seconds until the pause indicator light flash.
e. open the front cover in order to see the paper properly (important).
f. by using the "LF/FF or "Load/Eject" button arrange the paper upward or downward.
g. Once the paper in a required position to start print, press again once the "Pause" button" to exit from the Micro Adjustment Mode.
h. Close the printer cover (Important).
i. Press "Load/Eject" button to save the settings and re arrange the paper to start position automatically.
7. Adjust the Tear Position of the paper.
a. Switch off printer and on.
b. Press "Tear Off" or "Font" button and make sure that Tear Off light is flashing (Important).
c. press and hold "Pause" button for 3 seconds until the pause indicator light flash.
d. open the front cover in order to see the paper properly (important).
e by using the "LF/FF or "Load/Eject" button arrange the paper upward or downward.
f. Once the paper in a required position to tear it, press again once the "Pause" button" to exit from the Micro Adjustment Mode.
g. Close the printer cover (Important).
h. Press "Tear Off" button again to save the settings"
i. Switch Off the Printer and On it.
8. Open Printer Driver Properties & Change the Top Margin settings from "Driver" to printer.
9. Done!. Test the print.